CS125NDL-CD-WV rechargeable voice sound and light alarm with sound and light alarm portable battery voice sound and light alarm

Practical type suitable for power supplies uncomfortable places

LED bright light emitting diode SERIES-125mm

Product Features

1. with a rechargeable battery, portable, industrial, voice prompts safety warning by sound and light novel product designs, set warning lights and high loudness horns for the integration of sound and light combination products,

2. the use of mirror-reflection technology to keep the light diffusion, glows more uniform designed, high brightness LED light/flashing warning lights, lights

3. the internal circuit board equipped with light emitting mode select switch, users can choose according to demand long, shiny, detailed options shown in the table below

4. suitable for all kinds of cranes, road, crane and conveyor equipment, ports, ship machinery, iron and steel industry, petrochemical industry, outdoor equipment, production lines and other industrial warning

5. lamp color: Red-R, yellow-Y, green-G blue-B

6. shiny number: 60~80/MIM

7.音量: 110dB

7. volume: 110dB

9. installation: can use the magnet adsorption in a fixed location on the bottom.

10. protection class: IP44

11.remote control, light control, infrared control, power sound and light alarm, battery sound and light alarm, voice prompts, and other special requirements can be customized according to user requirements

11. charge for 4 hours continuous work 8-hour

Product Specifications

model

Built-in sound

voltage

current

weight

flashe

Color

CS125NDL

Alarm sound-WS 

Equipped with AC220VDC12V charger

 0.060A

1.56Kg

60-80Per/Min

RED-R

YELLOW-Y

Voice prompts-WV 

GREEN-G 

BLUE-B

White-W

* Overall installation diagram

* Wiring

Power cord into port (CABLE ENTRY)

1. the use of waterproof connectors

2. power cord specification: UL1015-NO.16 (1.25sq) x 2c

3. using the nut at the bottom of the product (M5-3EA), fixing this product.

Wiring

1.AC AC power supply: without polarity directly connected to the power.

2.DC DC power supply:-black terminal connected to the negative (-).

3. for a more secure connection, ends of the power cables using cold press terminal block "o", "u"

Customized products (-LC) leads to the power cord and signal cable.

1. lead power cord specification: UL1015-NO18 (0.75sq) x 2c

2. led signal cable specifications: UL1007-NO.22 (0.3SQ) 400mm

* Use notices

1. this product can be used outdoors, waterproof, dust-proof structure of the products, when you connect the power cord or other switching operations, when disassembling, assembling various parts of the fixing bolts must be tightened to ensure product properties of waterproof and dustproof.

2. power lines to connect the entrance used for waterproofing joints or explosion-proof fittings, ensure they are closed. Entrance of the enclosed power supply cable is not placed in the cold air outside, intrusion of foreign bodies such as damage due to moisture or dust.

3. using voltage than the rated voltage up or down too sharply will shorten the life or cause the product to adverse issues. Please ensure that the voltage at nominal voltage range within ± 5%.

4. the shade or the surface of the body, contact with corrosive chemicals will lead to deformation or damage product issues such as fading, users should pay special attention.

5. do not give the product strong impacts, which will cause damage to parts or circuit breaker

6. do not force drawn wires exposed on the product. Product failures due to this is one of them.

* Signal selection and connection method

Tone types selection methods

Purchase form (LC):-the use of external contact control

Standard form:-with internal switch

1. this product has 12 alarms and 20 kinds of music options, standard product (using an internal selection tone selector switch) can take advantage of the sound on selector switch (left), select audio type

2. use of external contacts choose tone-customized products (-LC) wiring, refer to the picture on the left content types for the selected sound.

Method of adjusting volume

1. this product has a volume control device on an internal circuit board (left). Adjuster to rotate in the clockwise direction, increase the volume, counterclockwise rotation in the direction of reducing the volume.

Please carefully read the user manual and refer to the chart in the correct method of operation.

* Lights shining light/select

For your convenience, shining light/select switch on the mounting plate. Want to carefully read the instructions and refer to the product structure in the right ways.

1. lamp cover (safety net) separation: holding rings that hold the cover (safety net) bolts (M4 bolts 4EA) unscrew and separate shade holding rings (safety net) and shade, confirm that shining light/select switch on the LED circuit board. (Figure below)

2. light/bright switch selector:

A). light/bright switch selector, select the desired action

B). time switch • position on.

C). in the LF position when shining.

*Model Selection

CS125NDL  

 -  CD   -

W1   -

 220   -

      R   -

 -   K -

C

Model

Charging

Sound

Charging voltage

Shade color

Sound Control

Installation

CS125NDL-(LED Long bright)

W1-1 kind Warning tones

12-DC12V

RED-R

No - Standard

No - the standard M5 screws

CS125NDLF-(LED Brilliant)

W3-3 kind Warning tones

24-DC24V

YELLOW-Y

K-Switch Control

CS125DLS-(LED Strobe)

W7-7 kind Warning tones

36-AC36V

GREEN-G 

V-External volume control

C - Magnetic installation

CS125DLR-Rotating lights

W12-12 kind Warning tones

110-AC110V

BLUE-B

KV-Switch Control+External volume control

W20-20 kind of music tones

220-AC220V

White-W

WV-voice channel 10

380-AC380V